Canon 3U5MGXSBA 5MP Sensor Evaluation Kit
Get a Quote for the Canon 3U5MGXSBA 5MP Sensor Evaluation Kit
Please fill out the form below to request a quote. Fields marked with * are required.
Assess sensor performance for your applications with the Canon 3U5MGXSBA 5 MP Global Shutter CMOS Sensor Evaluation Kit.
The Evaluation Kit includes a camera with a pre-installed Monochrome, RGB or RGB-NIR (near-infrared) Canon 3U5MGXSBA 5 MP global shutter CMOS sensor of your choice. Featuring raw data serial output via a USB 3.1 (Gen 1) interface, the evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA*.
The Canon 3U5MGXSBA 5 MP CMOS Sensor Evaluation Kit includes:
- Evaluation camera with pre-installed sensor (mono, RGB, or RGB-NIR )
- Accessory package for out-of-the-box operation (quick start guide, power supply, all necessary cables)
- Embedded software to setup the sensor, acquire image data, and communicate over USB 3.1 interface with any USB 3 compliant UI
- PC-based UI application available for download to communicate with the camera
- Sensor board design files source code*
- VHDL code for the FPGA*
*Source code and VHDL code only available upon request with an NDA
NOTE: A Lens is not included in this kit.
Speak with a Phase 1 Technology imaging expert about suitable lens options that will help you to effectively evaluate sensor performance for your applications.
TECHNICAL INFORMATION:
Sensor Specs | |||
---|---|---|---|
Color Filter | RGB | Monochrome | RGB-NIR |
Sensitivity (e/lx/sec) | 30,000 (Green) | 47,000 | 30,000 (Green) |
Dark Random Noise | 2.6e rms @ Analog gain x1 | ||
Saturation (@ Analog gain 0 dB) | 12,000e - Dynamic Range Priority Mode | ||
7,000e - Frame Rate Priority Mode | |||
Resolution | 5 megapixels | ||
Effective Pixels | 2592 x 2056 (Horizontal xVertical) | ||
Sensor Size | Approx. 2/3 inch (8.8mm x 7.0mm) | ||
Pixel Size | 3.4µm x 3.4µm | ||
Maximum Frame Rate | 60fps - Dynamic Range Priority Mode | ||
120fps - Frame Rate Priority Mode | |||
Shutter Type | Global electronic shutter function | ||
Power Consumption (Type) | 500mW (all pixels @ 60 fps) | ||
Evaluation Kit Camera Specs | |||
FPGA | Intel Arria 10 | ||
FPGA Processor | Dual Core A9 ARM | ||
Interface | USB 3.1 Gen 1 | ||
AIA Vision Protocol | |||
Programmable General Purpose I/O | 4 External FPGA GPIO Pins | ||
3 Opto-Isolated Input Pins | |||
Use as trigger / exposure inputs | |||
Bit Rate/Maximum Frame Rate | 8-Bit: 50 fps | ||
12-Bit: 33 fps | |||
ISP Functions | Region of Interest | ||
Exposure Control | |||
Framerate Control | |||
Bad Pixel Replacement | |||
Trigger Mode | External | ||
Debug / Registry Setting Control | Peek / Poke Commands | ||
Lens Mount | C-Mount | ||
Power Input | 12 VDC | ||
Hardware / Software Requirements | Windows 10 64 bit PC with USB 3.0 port available GenTL Viewer Software (provided) MityCAM-3U5MGXS Camera Head (provided) Camera Power Supply (provided) USB 3.0 Cable (provided) GPIO/Serial Cable (provided) |