Sony IMX 676AAMR Sensor
Diagonal 10.04 mm (Type 1/1.6) CMOS Solid-state Image Sensor with Square Pixel for Monochrome Cameras
The IMX676-AAMR1 is a diagonal 10.04 mm (Type 1/1.6) CMOS active pixel type solid-state image sensor with a square pixel array and 12.63 M effective pixels. This chip operates with analog 3.3 V, digital 1.1 V, and interface 1.8 V triple power supply, and has low power consumption. High sensitivity, low dark current and no smear are achieved. This chip features an electronic shutter with variable charge-integration time.
(Application: Security cameras)
TECHNICAL INFORMATION:
- CMOS active pixel type dots
- Built-in timing adjustment circuit, H/V driver and serial communication circuit
- Input frequency: 24 MHz / 27 MHz / 37.125 MHz / 72 MHz / 74.25 MHz
- Number of recommended recording pixels: 3536 (H) × 3536 (V) approx. 12.50M pixel
- Readout mode: All-pixel scan mode
- Window cropping mode
- Horizontal / Vertical direction - Normal / Inverted readout mode
- Readout rate: Maximum frame rate in All-pixel scan mode: 12 bit: 30 frame/s, 10 bit: 60 frame/s
- Dual Speed Streaming (DSS) function
- High dynamic range (HDR) function
- Digital overlap HDR
- Clear HDR
- Synchronizing sensors function
- Variable-speed shutter function (resolution 2H unit)
- CDS / PGA function
- 0 dB to 30 dB: Analog Gain 30 dB (step pitch 0.3 dB)
- 30.3 dB to 72 dB: Analog Gain 30 dB + Digital Gain 0.3 dB to 42 dB (step pitch 0.3 dB)
- Supports I/O
- CSI-2 serial data output (2-Lane / 4-Lane / 8-Lane / 4-Lane × 2ch)
- RAW10 / RAW12 output
- AR coating on cover glass (Both sides)
Quick Info for the Sony IMX 676AAMR Sensor
FPS : | 30 fps |
---|---|
Manufacturer: | Sony |
Pixel Size : | 2.0µm |
Resolution : | 12.63 M |
Scan: | STARVIS |
Shutter : | Rolling |
Signal : | Monochrome |